Formax Cut-True DDC20 Automatic Digital Label Cutter: Kiss-Cut Labels With No Dies

The Formax Cut-True DDC20 is a tabletop digital label cutter that kiss-cuts printed sheets up to 13" x 19" into any shape, with no dies. It feeds from a 120-sheet tray and reads a QR code on each sheet to recall that job's cutting settings.

Formax calls it an entry point into on-demand print finishing, and that's fair. The spec sheet is dated 11/2026, so this is a new model. I'm getting price and availability from our rep, and I'm not going to guess at either. See the rest of the Formax products we carry.

Formax Cut-True DDC20

Does the Cut-True DDC20 need dies?

No. The Cut-True DDC20 cuts from a digital file with a blade, so there are no dies to buy, store or wait on. Formax lists "no dies or setup costs" as the first standard feature. The cut path comes from your artwork, and a high-speed CCD camera registers each printed sheet before the blade moves.

It's a kiss-cut machine. The blade cuts the label and leaves the backing, which is how a sticker peels off a sheet. Kiss-cut is the only capability on the spec sheet. If you need to cut all the way through, ask me before you order.

Kiss-cut sticker being peeled from its backing sheet, cut by the Formax Cut-True DDC20

Can the DDC20 cut a stack of different jobs?

Yes. The Cut-True DDC20 reads the QR code on each printed sheet and automatically recalls that job's settings from its Job Library, so mixed jobs run in a single stack. Nobody stands at the machine changing settings between designs.

It also has two ways to run. Direct Mode works from a computer, so you can adjust settings on the fly. Hold Mode stores the job parameters in a file you move over USB, so the cutter runs standalone. Hold Mode is the one I'd ask about first if the cutter is going in a media center instead of a print shop.

QR code printed on a sheet that the Formax Cut-True DDC20 reads to recall job settings

How big a sheet and how thick a stock will it cut?

The Cut-True DDC20 takes standard sheets of 8.5" x 11", 11" x 17", 12" x 18" and 13" x 19". Custom sizes run from 6" x 7.5" (150 x 190 mm) up to 13" x 19" (330 x 483 mm). Media thickness is 140 to 350 microns.

  • Cutting force → 500 gram-force
  • Top speed → up to 31.5" per second (800 mm per second)
  • Feeder → 3-roller, up to 120 sheets, media up to 19" long
  • Feed system → dual grip and drive, holding media on both sides of the cutting head so it can cut closer to the edges

Check the thickness of your label stock against 350 microns before you order a case of it.

Dual-grip feed rollers and cutting head on the Formax Cut-True DDC20

What does it take to run the Cut-True DDC20?

Cut-True Pro Production Studio Software is included, and Formax says it integrates with Adobe Illustrator. A PC workstation with a stand and a 32" curved monitor, the CCS8, is an option.

It weighs 68 lb (31 kg) and measures 26.3" W x 18.5" D x 13.7" H, on 100-240V 50/60Hz power. I'd call 68 lb a two-person carry. The clip-on catch tray stores underneath when you're not cutting. Supplies are 30, 45 and 60 degree cutting blades in 3-packs, plus cutting strips.

Optional CCS8 PC workstation with 32-inch curved monitor for the Formax Cut-True DDC20

What the DDC20 is not

It's not a printer. You print the sheets somewhere else, then the DDC20 cuts them. It's also sheet-fed, and nothing on the spec sheet mentions roll labels. If you're finishing with lamination or binding too, look at our Formax FlashGuard laminators and Formax ReadyWire3M wire binding.

Who should buy the DDC20, and who shouldn't

Buy the Cut-True DDC20 if a print shop, copy center or district print room makes stickers and labels in short runs and is paying an outside shop for them, or cutting by hand. No dies means short runs don't carry a tooling cost. That's the whole point of this machine.

Skip it if you outsource a few hundred labels a year, if your stock is thicker than 350 microns, or if you need a sheet bigger than 13" x 19". I'd also ask about Formax's bigger Cut-True DDC50 before you decide. I'm getting a side-by-side from the rep. Also see Formax show floor and open box specials.

Questions we get

What size sheets does the Cut-True DDC20 cut? Standard sheets of 8.5" x 11", 11" x 17", 12" x 18" and 13" x 19". Custom sizes run from 6" x 7.5" (150 x 190 mm) up to 13" x 19" (330 x 483 mm), fed from a tray that holds up to 120 sheets.

How thick can the media be? Up to 350 microns, with a range of 140 to 350 microns. Check the thickness of your label stock before you order. Cutting force is 500 gram-force.

Can it cut different jobs in one stack? Yes. It reads a QR code on each printed sheet and automatically recalls that job's settings from the Job Library, so mixed jobs process in a single stack.

Does the Cut-True DDC20 need a computer? Not every time. In Direct Mode it runs from a computer. In Hold Mode the job parameters are stored in a file you move over USB, and the cutter runs standalone.

How much does the Cut-True DDC20 cost? I don't publish a price, since it's a quote item and I'm still getting availability from Formax. Send me your quantity and what you'll cut, and I'll send a quote.

Tell me what stock you print on and what a typical run looks like, and I'll ask Formax whether we can show you the DDC20 cutting it.

Ready for a quote?

Contact us to get the best pricing in the industry.

Contact us

Ready for a quote?

Contact us to get the best pricing in the industry.

Contact us