Paralan Parts Index

ULTRA320 SCSI HOST BUS ADAPTER FOR PCI / PCI-X COMPUTERS
MODEL DESCRIPTION LIST PRICE OPTIONS FOR P79320-2 LIST PRICE

P79320-1 U320 1-channel SCSI HBA Kit 4543 Internal Ribbon Cable with 5 connectors
P79320-2 U320 1-channel HBA Board only 4947 LVE/MSE Terminator (unshielded) 29.00

SCSI BUS EXTENDERS FOR FIBER OPTIC CABLE
MODEL DESCRIPTION LIST PRICE MODEL DESCRIPTION LIST PRICE
FX50 SE for Fiber-Enclosed Not Available FX51 SE for Fiber-Board Not Available
The FX50/FX51 is no longer available.

NOTE: An extender SET consists of a PAIR of Paralan Extenders plus a fiber cable.

SERIES 80 - LVD/MSE/HVD/SE WIDE SCSI EXPANDERS
MODEL DESCRIPTION LIST PRICE MODEL DESCRIPTION LIST PRICE
MH32A LVD/MSE to HVD-Enclosed MM16 LVD/MSE to LVD/MSE-Enclosed
MH33A LVD/MSE to HVD-Board MM17 LVD/MSE to LVD/MSE-Enclosed

MH16A LVD/MSE to HVD-Enclosed
MH17A LVD/MSE to HVD-Board

MS16A LVD/MSE to SE-Enclosed
MS17A LVD/MSE to SE-Board
MH19 LVD/MSE to HVD for HP LTO

SERIES 80 - NARROW LVD/MSE TO SE SCSI EXPANDER
MODEL DESCRIPTION LIST PRICE MODEL DESCRIPTION LIST PRICE
MS8A Narrow LVD/MSE to SE-Enclosed MS9A Narrow LVD/MSE to SE-Board

SINGLE-ENDED TO HVD SCSI CONVERTERS
MODEL DESCRIPTION LIST PRICE MODEL DESCRIPTION LIST PRICE
SD10D 8-bit - Enclosed SD16B 16-bit - Enclosed Use MH16A
SD11D 8-bit - Board level SD17C 16-bit - Board level Use MH17A

REGENERATORS?
MODEL DESCRIPTION LIST PRICE MODEL DESCRIPTION LIST PRICE
SIR-S8A 8-bit SE - Enclosed Use MS8A SIR-D16C 16-Bit HVD - Enclosed
SIR-S9A 8-bit SE - Board level Use MS9A SIR-D17C 16-Bit HVD - Board level
SIR-S16 16-bit SE - Enclosed Use MS16
SIR-S17 16-bit SE - Board level Use MS17

SCSI WRITE BLOCKING BOARD
MODEL DESCRIPTION LIST PRICE MODEL DESCRIPTION LIST PRICE
SR14A Enclosed-Without 8457-With 8435 & 8446 8435 6 inch Power Cable - 4-pin male molex to 5-pin DIN
8457 Power Supply for SR14A 75.00 8446 3 ft Power Cable - 4 pin female molex to 5-pin DIN
SR15A Board Level-Without Power Supply 8569 LVD/MSE Multimode Pass-Through Terminator (HD68)
SQ99-003 3 Ft SCSI Cable with HD68 Connectors 8570 HVD Pass Through-Terminator (HD68)

SCSI EXPANDER BOX FOR TABLETOP OR RACK
Model No.: EB1-XXX-T or R
Select one letter from each column:
MH33A Wide LVD/MSE to HVD Converter A A A
MS17A Wide LVD/MSE to SE Converter B B B
MM17 Wide LVD/MSE to LVD/MSE Expander C C C
SIR-D17C Wide HVD SCSI RegeneratoR D D D
No SCSI Expander Installed in This Position O O O
Tabletop Enclosure with Rubber Feet ...................................................................................……………………. T
Adapters for Rack Mounting the Enclosure - 1 Pair ................................................................…………………. . R

Example 1: Model No EB1-AOC-T ? Tabletop Model EB1 with MH33A in Expander position 1, no
expander in position 2 and MM17 in position

Example 2: Model No EB1-AAA-R ? Rack Mount Model EB1 with MH33A Expanders in all
three positions.
Model EB1 with other SCSI Expanders available on custom quote.

SCSI RACK MOUNT EXPANDER BOX FOR TELECOM
Model No.: TB1-XX-R
Select one letter from each column:
MH33A Wide LVD/MSE to HVD Converter A A
MS17A Wide LVD/MSE to SE Converter B B
MM17 Wide LVD/MSE to LVD/MSE Expander C C
SIR-D17C Wide HVD to HVD Extender D D
No SCSI Expander Installed in This Position 0 0

Example 1: Model No TB1-AA-R ? Rack Mount Enclosure with MH33A Wide LVD/MSE to HVD
Converter in both positions 1 and 2.

Example 2: Model No TB1-A0-R ? Rack Mount Enclosure with SIR-D17C Wide
HVD to HVD Extender in position 1, no expander in position 2.

Model TB1 with other SCSI Expanders available on custom quote.

SCSI 2X1 SWITCH FOR TABLETOP OR RACK
Model No.: SS1-XXX-T or R

Select one letter from each column: PORT 1 COM PORT 2
High Voltage Differential (HVD) Wide port H H H
Multimode LVD (LVD/MSE) Wide port L L L
Single-ended Wide (68-pin HD connector) S S S
Single-ended Narrow (50-pin centronics type connector) N* N* N*
Tabletop Enclosure with Rubber Feet ....................................................................................…………….……... T
Adapters for Rack Mounting the Switch - 1 Pair ......................................................................…………………. R
* N version available only as SS1-NNN-T or R.

Example: Model No SS1-LHL-T ? Tabletop Model SS1 with LVD/MSE on both switched ports and HVD on the Common port.

SCSI CABLE TESTERS
MODEL DESCRIPTION LIST PRICE OPTIONS FOR MODEL ST1000 PRICE Ea
ST123 Benchtop SCSI Cable Tester AD1002* Loopback Module for ST1000
ST1000 Handheld SCSI Cable Tester AD1003* 68-pin HD male to VHDCI female adapter
2158 VHDCI to 68-pin HD adapter for ST123 AD1004* 68-pin HD male to 50-pin HD female adapter
6141 9V Battery for ST1000 AD1005* 68-pin HD male to 50-pin centronic female adapter
AD1001* Sacrificial Connector for ST1000 AD1006* 68-pin HD male to 2 x 25 pin IDC male adapter n.a.
*These modules and adapters are not suitable for any use other than as cable adapters for the ST1000.

PARALAN ?QUIET CABLE?? FOR LVD/MSE, SE AND HVD SCSI

MODEL NUMBER: SQ___ ___-____
Specify two of the following connectors:
Centronics (SCSI-1, Alt 2 Cable) SCSI-1 male .................................................…………….. 0 0
DB-50 male ..............................................................................................………….....…. 1 1
50-pin High-Density (SCSI-2, Alt 1) male, latch fasteners ........................……………........ 2 2
68-pin High-Density (P-Cable) SCSI-3, male, thumbscrew fasteners ........…………........... 9 9
50-pin High-Density SCSI-2, male, right-angle, cable exit pin 1 end ........……………........ J J
50-pin High-Density SCSI-2, male, right-angle, cable exit pin 50 end .........……………..... K K
68-pin High-Density (P-Cable) SCSI-3, male, right angle, exit pin 1 end ......…………….... N N
68-pin High-Density (P-Cable) SCSI-3, male, right angle, exit pin 68 end .……………....... P P
50-pin High-Density SCSI-2, male, screw fastener (2-56 thread) .............…………......…… R R
68-pin VHDCI Shielded, Alt-4, P-Cable………………………………………………….…. V V

Length in Feet for 50 conductor SCSI cable ...............................................................………………. (001-160)
Length in Feet for 68 conductor SCSI cable ..............................................................……………….. (001-160)

EXAMPLE: Part Number: SQ29-015
Paralan SCSI ?Quiet Cable?? with SCSI-2 connector on one end
and SCSI-3, 68-pin High-Density connector on the other, 15 feet long.

FIBER OPTIC CABLE FOR PARALAN SCSI BUS EXTENDERS
PART NUMBER DESCRIPTION PRICE EACH_
PF6MC-***** FX50/FX51 Duplex Fiber Cable with SC Connectors
***** = Desired Cable Length in Feet (5 digits for PF6MC).

OPTIONS
PART No DESCRIPTION LIST PRICE
2811 Mounting Bracket to mount one board-level unit in 5.25 inch drive bay.
Includes front panel LED. Not suitable for SIR-D17 or SIR-S9.
8211 50-pin HD replacement connector assembly for continuity test on ST123
8222 50-pin centronics replacement connector assembly for continuity test on ST123
8244 68-pin HD replacement connector assembly for continuity or integrity test on ST123
9818 50-pin HD & centronics replacement connector assembly for integrity test on ST123
DUAL Two Centronics-type connectors on each end of SD10 - Case is 2.5" high
9717 SC male to ST female fiber adapter cable - 1 ft long
PAR5780 SCSI Expander ASIC www.paralan.com/5780.html

Product Notes:
1. Centronics type 50-pin female (Shielded, Alt 2-A cable) connector is standard on FX50, SD10, SIR-S8, MS8 Expanders.
2. The 50-pin dual row male header on 0.1 inch centers (Unshielded, Alt 2-A cable) is standard connector on the SD11, SIR-S9, and MS9.
3. The 68-pin High-Density female (P-cable) connector is standard on all Wide (16-bit) Expanders, the P79320 HBA and the ST1000.
4. The SS1, EB1 and TB1 have 68-pin High-Density female (P-Cable) connectors on Wide ports and 50-pin female centronics type (Shielded, Alt 1-A cable) connectors on Narrow ports.
5. The standard power supply for enclosed expanders is a desk-mount, 100 to 240 VAC auto-select, 47-63 Hz supply with removable IEC power cord.
6. The power supply for the SD10, SD16, SF40 and FX50 cannot be used with other products because it has a different connector.
7. The power supply for the MH32, MH16, MM16, MS16 & MS8 cannot be used with other products because it has a different connector.
8. The power supply for the EB1 and TB1 Enclosures and SS1 SCSI Switch is built into the enclosure.
9. The optional SR14A power supply has 5VDC and 12VDC and a DIN connector. It can power the SR14A and one external drive. It is unique to the SR14A and must not be used with any other product.
10. P/N 8435, SR14A/SR15A power cable, is 6 inches long, has a male 4-pin molex type and a male 5-pin DIN connector and is used from an internal computer power harness to the female DIN power connector on the host side of the SR14A or SR15A. P/N 8446 is like P/N 8435, but is 3 feet long and is used to power the drive under test from the SR14A/SR15A. One of each cable is provided with the SR14A. Neither cable is included with the SR15A.