Serial
Attached SCSI (SAS)
Products
JetStor SAS Model
616

Building
upon a solid foundation,
we raise the performance
bar even higher with
the JetStor SAS Model
616F. Featuring dual-redundant
active/active array
controllers, this 16
bay RAID array delivers
reliable data protection
combined with the high
performance of 4Gbit
Fiber Channel host interfaces
and quad 3Gbit SAS disk
channel expanders to
support mission critical
business applications.
Engineered to meet stringent
demands for continuous
availability, JetStor
SAS 616F RAID array
spotlights a brand-new
64-bit Intel IOP341
RISC processor for blazingly
fast parity calculation
and I/O operations,
completely cableless
SAS backplane-based
design with SES capabilities,
and storage capacities
reaching 32TB in one
small 3U enclosure.
Low
service and integration
costs are assured by
the JetStor's cableless
design, two redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and dual
embedded RAID controllers.
Three year warranty
comes standard with
every array and covers
all components.
JetStor
SAS 616F RAID addresses
many challenges present
in datacenters and delivers
unparalleled storage
flexibility, higher
levels of data availability,
management and configuration
simplicity, all while
securing maximum investment
protection to support
future growth.
Drive Capacity
SAS drive capacities
of 73GB (15,000 rpm),
146GB (15,000 rpm),
300GB (15,000 rpm),
450GB (15,000 rpm),
and 1TB (7,200 rpm)
are available.
SATA
drive capacities of
1TB (7,200 rpm) and
2TB (7,200 rpm) are
available.
Per
enclosure maximum capacity
7200GB when using 450GB
SAS drives.
Per
enclosure maximum capacity
of 32TB when using 2TB
SATA drives.
Scaleable
to 128 Terabytes with
three additional expansion
chassis.
JetStor SAS Model
516iS

Adding
storage capacity is
now as simple as plugging
a cable into an available
port on an Ethernet
switch. Brand new JetStor
SAS Model 516iS 16 bay
RAID array delivers
reliable data protection
combined with the ease
of use and compatibility
advantage of iSCSI to
support your organization
storage requirements.
No infrastructure upgrades
are needed - iSCSI JetStor
will provide block-level
storage across your
existing network. Four
Gigabit Ethernet ports
provide enough bandwidth
to satisfy modern-day
server demands.
Engineered
to meet stringent demands
for continuous availability,
JetStor SAS 516iS RAID
array features powerful
Intel Xscale 64-bit
RISC processor for blazingly
fast I/O operations,
parity-assist ASIC,
iSCSI-assist engine,
TCP Offload Engine (TOE),
completely cableless
backplane-based design,
and storage capacities
reaching 32TB in one
small 3U enclosure.
Low
service and integration
costs are assured by
the JetStor's cableless
design, dual redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and embedded
RAID controller. Three
year warranty comes
standard with every
array and covers all
components.
The
JetStor SAS 516iS RAID
addresses many challenges
present across a variety
of businesses and delivers
unparalleled storage
flexibility, higher
levels of data availability,
management and configuration
simplicity, all while
securing maximum investment
protection to support
future growth.
Drive Capacity
Serial ATA drive capacities
of 73GB (10,000 rpm),
150GB (10,000 rpm),
200GB (7,200 rpm), 250GB
(7,200 rpm), 300GB (7,200
rpm), 400GB (7,200 rpm),
500GB (7,200 rpm), 750GB
(7,200 rpm), 1TB (7,200rpm)
and 2TB (7,200 rpm)
are available.
SAS
drive capacities of
73GB (15,000 rpm), 146GB
(15,000 rpm), 300GB
(15,000 rpm), 450GB
(15,000 rpm), 600GB
(15,000 rpm), 1TB (7,200
rpm), and 2TB (7,200
rpm) are available.
Full
48-bit ATA addressing
standard support.
S.M.A.R.T.,
NCQ and OOB Staggered
Spin-up capable drives
supported.
Maximum
capacity 32TB when using
2TB SATA or SAS drives.
JetStor SAS Model
516F

Based
on the 5th generation
RAID controller architecture,
JetStor SAS Model 516F
16 bay RAID array combines
high density SATA drives
or speedy SAS drives
with lightning-fast
4Gbit/sec fiber host
channels for a rapid,
uninterrupted access
to your most demanding
applications requiring
either high bandwidth
or very rapid random
I/O performance. Exchange
servers will become
more responsive, SQL
server database queries
will run faster, file
server reaction will
greatly improve - all
translating to happier
users. Engineered to
meet stringent demands
for continuous availability,
JetStor SAS 516F RAID
array features powerful
Intel RISC processor
for blazingly fast I/O
operations, parity-assist
ASIC, completely cableless
backplane-based design,
and storage capacities
of almost 32TB in one
small 3U enclosure.Further
expansion is possible
via JetStor JBOD expansion
chassis. Optional upgrade
to dual 8Gbit fiber
host channels is available.
Low
service and integration
costs are assured by
the JetStor's cableless
design, two redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and embedded
RAID controller. Three
year warranty comes
standard with every
array and covers all
components.
The
JetStor SAS 516F RAID
addresses many challenges
present in video production
studios and delivers
ample bandwidth, unparalleled
storage flexibility,
higher levels of data
availability, management
and configuration simplicity,
all while securing maximum
investment protection
to support future growth.
JetStor SAS Model 516S

Based
on the 5th generation
RAID controller architecture,
JetStor SAS Model 516S
16 bay RAID array combines
high density SATA drives
or speedy SAS drives
with robust serial attached
SCSI host channels for
a rapid, uninterrupted
access to your most
demanding applications
requiring either high
bandwidth or very rapid
random I/O performance.
Exchange servers will
become more responsive,
SQL server database
queries will run faster,
file server reaction
will greatly improve
- all translating to
happier, more productive
users. Engineered to
meet stringent demands
for continuous availability,
JetStor SAS 516S RAID
array features powerful
Intel RISC processor
for blazingly fast I/O
operations, parity-assist
ASIC, completely cableless
backplane-based design,
and storage capacities
of almost 32TB in one
small 3U enclosure.Further
expansion is possible
via JetStor JBOD expansion
chassis.
Low
service and integration
costs are assured by
the JetStor's cableless
design, two redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and embedded
RAID controller. Three
year warranty comes
standard with every
array and covers all
components.
The
JetStor SAS 516S RAID
addresses many challenges
present in datacenters
and delivers ample bandwidth,
unparalleled storage
flexibility, higher
levels of data availability,
management and configuration
simplicity, all while
securing maximum investment
protection to support
future growth.
Drive
Capacity
Serial ATA drive capacities
of 73GB (10,000 rpm),
150GB (10,000 rpm),
200GB (7,200 rpm), 250GB
(7,200 rpm), 300GB (7,200
rpm), 400GB (7,200 rpm),
500GB (7,200 rpm), 750GB
(7,200 rpm), 1TB (7,200rpm)
and 2TB (7,200 rpm)
are available.
SAS
drive capacities of
73GB (15,000 rpm), 146GB
(15,000 rpm), 300GB
(15,000 rpm), 450GB
(15,000 rpm), and 1TB
(7,200 rpm) are available.
Full
48-bit ATA addressing
standard support.
S.M.A.R.T.,
NCQ and OOB Staggered
Spin-up capable drives
supported.
Maximum
capacity 240TB when
using 2TB SATA drives
and seven optional SAS
JBODs.
JetStor
SAS Model 412iS

Adding
storage capacity is
now as simple as plugging
a cable into an available
port on an Ethernet
switch. Brand new JetStor
SAS Model 412iS 12 bay
RAID array delivers
reliable data protection
combined with the ease
of use and compatibility
advantage of iSCSI to
support your organization
storage requirements.
No infrastructure upgrades
are needed - iSCSI JetStor
will provide block-level
storage across your
existing network. VMWare
certification insures
compatibility with virtualization
technology installed
in the enterprise.
Engineered
to meet stringent demands
for continuous availability,
JetStor SAS 412iS RAID
array features powerful
Intel Xscale 64-bit
RISC processor for blazingly
fast I/O operations,
parity-assist ASIC,
iSCSI-assist engine,
TCP Offload Engine (TOE),
completely cableless
backplane-based design,
and storage capacities
reaching 24TB in one
small 2U enclosure.
Low
service and integration
costs are assured by
the JetStor's cableless
design, dual redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and embedded
RAID controller. Three
year warranty comes
standard with every
array and covers all
components.
The
JetStor SAS 412iS RAID
addresses many challenges
present across a variety
of businesses and delivers
unparalleled storage
flexibility, higher
levels of data availability,
management and configuration
simplicity, all while
securing maximum investment
protection to support
future growth.
Drive Capacity
Serial ATA drive capacities
of 73GB (10,000 rpm),
150GB (10,000 rpm),
200GB (7,200 rpm), 250GB
(7,200 rpm), 300GB (7,200
rpm), 400GB (7,200 rpm),
500GB (7,200 rpm), 750GB
(7,200 rpm), 1TB (7,200rpm)
and 2TB (7,200 rpm)
are available.
SAS
drive capacities of
73GB (15,000 rpm), 146GB
(15,000 rpm), 300GB
(15,000 rpm), 450GB
(15,000 rpm), 600GB
(15,000 rpm), 1TB (7,200
rpm), and 2TB (7,200
rpm) are available.
Full
48-bit ATA addressing
standard support.
Maximum
capacity 24TB when using
2TB drives.
JetStor SAS 616iS
16 bay RAID

Storage
provisioning is now
as simple as plugging
a cable into an available
port on an Ethernet
switch. Brand new JetStor
SAS 616iS 16 bay RAID
array delivers reliable
data protection combined
with the ease of use
and compatibility advantage
of iSCSI to support
your organization storage
requirements. Dual Redundant
RAID Controllers provide
additional performance
and fault-tolerance
advantages over a single
controller configuration.
No infrastructure upgrades
are needed - iSCSI JetStor
will provide block-level
storage across your
existing network. Four
Gigabit Ethernet ports
per controller provide
enough bandwidth to
satisfy modern-day server
demands.
Engineered
to meet stringent demands
for continuous availability,
JetStor SAS 616iS RAID
array features powerful
Intel Xscale 64-bit
RISC processor for blazingly
fast I/O operations,
parity-assist ASIC,
iSCSI-assist engine,
TCP Offload Engine (TOE),
completely cableless
backplane-based design,
and storage capacities
reaching 32TB in one
small 3U enclosure.
Low
service and integration
costs are assured by
the JetStor's cableless
design, dual redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and dual-redundant
active/active embedded
RAID controllers. Three
year warranty comes
standard with every
array and covers all
components.
The
JetStor SAS 616iS RAID
addresses many challenges
present across a variety
of businesses and delivers
unparalleled storage
flexibility, higher
levels of data availability,
management and configuration
simplicity, all while
securing maximum investment
protection to support
future growth.
Drive Capacity
Serial ATA drive capacities
of 73GB (10,000 rpm),
150GB (10,000 rpm),
200GB (7,200 rpm), 250GB
(7,200 rpm), 300GB (7,200
rpm), 400GB (7,200 rpm),
500GB (7,200 rpm), 750GB
(7,200 rpm), 1TB (7,200rpm),
and 2TB (7,200 rpm)
are available.
SAS
drive capacities of
73GB (15,000 rpm), 146GB
(15,000 rpm), 300GB
(15,000 rpm), 450GB
(15,000 rpm), 600GB
(15,000 rpm), 1TB (7,200
rpm), and 2TB (7,200
rpm) are available.
Full
48-bit ATA addressing
standard support.
S.M.A.R.T.,
NCQ and OOB Staggered
Spin-up capable drives
supported.
Maximum
capacity 32TB when using
2TB SATA or SAS drives.
JetStor SAS Model
642F

Massive
data requires massive
storage - the JetStor
SAS Model 642F. Featuring
dual-redundant ALUA-compliant
array controllers, this
42 bay RAID array delivers
reliable data protection
combined with the high
performance of 4Gbit
Fiber Channel host interfaces
and quad 3Gbit SAS disk
channel expanders to
handle astounding amounts
of data. Engineered
to meet stringent demands
for continuous availability,
JetStor SAS 642F RAID
array spotlights a brand-new
64-bit IOP341 RISC processor
for blazingly fast parity
calculation and I/O
operations, completely
cableless SAS backplane-based
design with SES capabilities,
and storage capacities
reaching 84TB in one
compact 4U enclosure.
Low
service and integration
costs are assured by
the JetStor's cableless
design, dual redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and dual
embedded RAID controllers.
Three year warranty
comes standard with
every array and covers
all components.
JetStor
SAS 642F RAID addresses
many challenges present
in datacenters and delivers
unparalleled storage
flexibility, higher
levels of data availability,
management and configuration
simplicity, all while
securing maximum investment
protection to accommodate
future data growth.
Drive Capacity
SATA drive capacities
of 1TB (7,200 rpm) and
2TB (7,200 rpm) are
available.
SAS
drive capacities of
73GB (15,000 rpm), 146GB
(15,000 rpm), 300GB
(15,000 rpm), 450GB
(15,000 rpm), and 1TB
(7,200 rpm) are available.
Full
48-bit ATA addressing
standard support.
S.M.A.R.T.,
NCQ and OOB Staggered
Spin-up capable drives
supported.
Per
enclosure maximum capacity
of 84TB when using 2TB
SATA drives.
Scaleable
to over a hundred TB
using additional expansion
chassis.
JetStor SAS Model
624F

Great
things come in small
packages, like the JetStor
SAS Model 624F. Featuring
dual-redundant ALUA-compliant
array controllers, this
24 bay RAID array delivers
reliable data protection
combined with the high
performance of 4Gbit
Fiber Channel host interfaces
and quad 3Gbit SAS disk
channel expanders to
handle any data requiring
either fast throughput
or high IOPs. Engineered
to meet stringent demands
for continuous availability,
JetStor SAS 624F RAID
array spotlights a brand-new
64-bit IOP341 RISC processor
for blazingly fast parity
calculation and I/O
operations, completely
cableless SAS backplane-based
design with SES capabilities,
and storage capacities
reaching 15TB in one
compact 2U enclosure.
Low
service and integration
costs are assured by
the JetStor's cableless
design, dual redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and dual
embedded RAID controllers.
Three year warranty
comes standard with
every array and covers
all components.
JetStor
SAS 624F RAID addresses
many challenges present
in datacenters and delivers
unparalleled storage
flexibility, higher
levels of data availability,
management and configuration
simplicity, all while
securing maximum investment
protection to accommodate
future data growth.
Drive Capacity
SATA drive capacities
of 400GB (7,200 rpm)
and 500GB (7,200 rpm)
are available.
SAS
drive capacities of
73GB (15,000 rpm), 146GB
(15,000 rpm), 300GB
(10,000 rpm), 450GB
(10,000 rpm), and 600GB
(10,000 rpm) are available.
Full
48-bit ATA addressing
standard support.
S.M.A.R.T.,
NCQ and OOB Staggered
Spin-up capable drives
supported.
Per
enclosure maximum capacity
of 14.4TB when using
600GB SAS drives.
Scaleable
to tens of TB using
additional expansion
chassis.
SATA
PRODUCTS
JetStor SATA Model
516F

Based
on the 5th generation
RAID controller architecture,
JetStor SATA Model 516F
16 bay RAID array combines
high density SATA drives
with lightning-fast
4Gbit/sec fiber host
channels for a rapid,
uninterrupted access
to your most demanding
applications requiring
high bandwidth. It easily
handles uncompressed
1080i high-definition
video stream. Engineered
to meet stringent demands
for continuous availability,
JetStor SATA 516F RAID
array features powerful
PowerPC RISC processor
for blazingly fast I/O
operations, parity-assist
ASIC, completely cableless
backplane-based design,
and storage capacities
of almost 32TB in one
small 3U enclosure.
Low
service and integration
costs are assured by
the JetStor's cableless
design, two redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and embedded
RAID controller. Three
year warranty comes
standard with every
array and covers all
components.
The
JetStor SATA 516F RAID
addresses many challenges
present in video production
studios and delivers
ample bandwidth, unparalleled
storage flexibility,
higher levels of data
availability, management
and configuration simplicity,
all while securing maximum
investment protection
to support future growth.
Drive Capacity
Serial ATA drive capacities
of 73GB (10,000 rpm),
150GB (10,000 rpm),
200GB (7,200 rpm), 250GB
(7,200 rpm), 300GB (7,200
rpm), 400GB (7,200 rpm),
500GB (7,200 rpm), 750GB
(7,200 rpm), 1TB (7,200rpm),
and 2TB (7,200 rpm)
are available.
Full
48-bit ATA addressing
standard support.
Maximum
capacity 32TB when using
2TB drives
JetStor SATA Model
416iS

Adding
storage capacity is
now as simple as plugging
a cable into an available
port on an Ethernet
switch. Brand new JetStor
SATA Model 416iS 16
bay RAID array delivers
reliable data protection
combined with the ease
of use and compatibility
advantage of iSCSI to
support your organization
storage requirements.
No infrastructure upgrades
are needed - iSCSI JetStor
will provide block-level
storage across your
existing network. Engineered
to meet stringent demands
for continuous availability,
JetStor SATA 416iS RAID
array features powerful
Intel Xscale 64-bit
RISC processor for blazingly
fast I/O operations,
parity-assist ASIC,
iSCSI-assist engine,
TCP Offload Engine (TOE),
completely cableless
backplane-based design,
and storage capacities
reaching 32TB in one
small 3U enclosure.
Low
service and integration
costs are assured by
the JetStor's cableless
design, dual redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and embedded
RAID controller. Three
year warranty comes
standard with every
array and covers all
components.
The
JetStor SATA 416iS RAID
addresses many challenges
present across a variety
of businesses and delivers
unparalleled storage
flexibility, higher
levels of data availability,
management and configuration
simplicity, all while
securing maximum investment
protection to support
future growth.
Drive Capacity
Serial ATA drive capacities
of 73GB (10,000 rpm),
150GB (10,000 rpm),
200GB (7,200 rpm), 250GB
(7,200 rpm), 300GB (7,200
rpm), 400GB (7,200 rpm),
500GB (7,200 rpm), 750GB
(7,200 rpm), 1TB (7,200rpm)
and 2TB (7,200 rpm)
are available.
Full
48-bit ATA addressing
standard support.
Maximum
capacity 32TB when using
2TB drives
JetStor SATA Model
416S

Raising
the bar to a new level,
JetStor SATA Model 416S
16 bay RAID array delivers
reliable data protection
combined with the blazing
performance of Ultra320
SCSI to support mission
critical business applications.
Engineered to meet stringent
demands for continuous
availability, JetStor
SATA 416S RAID array
features powerful 400MHz
64-bit RISC processor
for blazingly fast I/O
operations, parity-assist
ASIC, completely cableless
backplane-based design,
and storage capacities
reaching 32TB in one
small 3U enclosure.
Low
service and integration
costs are assured by
the JetStor's cableless
design, three redundant
hot-swappable power
supplies with three
independent power inputs,
turbo cooling fans,
and embedded RAID controller.
Three year warranty
comes standard with
every array and covers
all components.
The
JetStor SATA 416S RAID
addresses many challenges
present in datacenters
and delivers unparalleled
storage flexibility,
higher levels of data
availability, management
and configuration simplicity,
all while securing maximum
investment protection
to support future growth.
Drive Capacity
Serial ATA drive capacities
of 73GB (10,000 rpm),
150GB (10,000 rpm),
200GB (7,200 rpm), 250GB
(7,200 rpm), 300GB (7,200
rpm), 400GB (7,200 rpm),
500GB (7,200 rpm), 750GB
(7,200 rpm), 1TB (7,200rpm)
and 2TB (5,400 rpm)
are available.
Full
48-bit ATA addressing
standard support.
Maximum
capacity 32TB when using
2TB drives.
JetStor SATA Model
412S

Raising
the bar to a new level,
JetStor SATA Model 412S
12-bay RAID array delivers
reliable data protection
combined with the blazing
performance of Ultra320
SCSI to support mission
critical business applications.
Engineered to meet stringent
demands for continuous
availability, JetStor
SATA 412S RAID array
features powerful 400MHz
64-bit RISC processor
for blazingly fast I/O
operations, parity-assist
ASIC, completely cableless
backplane-based design,
and storage capacities
reaching 24TB in one
small 2U enclosure.
Low
service and integration
costs are assured by
the JetStor's cableless
design, dual redundant
hot-swappable power
supplies with two independent
power inputs, turbo
cooling fans, and embedded
RAID controller. Three
year warranty comes
standard with every
array and covers all
components.
The
JetStor SATA 412S RAID
addresses many challenges
present in datacenters
and delivers unparalleled
storage flexibility,
higher levels of data
availability, management
and configuration simplicity,
all while securing maximum
investment protection
to support future growth.
Drive Capacity
Serial ATA drive capacities
of 73GB (10,000 rpm),
150GB (10,000 rpm),
200GB (7,200 rpm), 250GB
(7,200 rpm), 300GB (7,200
rpm), 400GB (7,200 rpm),
500GB (7,200 rpm), 750GB
(7,200 rpm), 1TB (7,200rpm)
and 2TB (5,400 rpm)
are available.
Full
48-bit ATA addressing
standard support.
Maximum
capacity 24TB when using
2TB drives.
NAS
PRODUCTS
JetStor NAS 2000
Storage Appliance

The
JetStor NAS 2000 Storage
Appliance provides a
powerful, scalable storage
option for your enterprise
network. This high-performance,
LAN-attached device
is designed to provide
shared storage to both
clients and servers
in Windows, UNIX, Apple
Macintosh, Novell or
mixed environments.
Engineered to meet stringent
demands for continuous
availability, JetStor
NAS 2000 features cableless
design, dual standard
Gigabit Ethernet ports
and optional dual SCSI
or Fiber Channel ports,
all encompassed in a
small 2U enclosure.
With 6 available PCIx
expansion slots, growth
opportunities abound.
The JetStor NAS 2000
connects to any JetStor
RAID array to insure
reliable uninterrupted
access to the data from
any network client.
Easy
to use Graphical User
Interface makes NAS
configuration a snap.
Expirienced and beggining
system administrators
alike will find that
administering and maintaining
the JetStor NAS 2000
requires very little
time and effort. Replication,
clustering, and failover
support insure near
100% availability. Additionally,
three year warranty
comes standard with
every NAS and covers
all components.
JetStor
NAS 2000 Storage Appliance
delivers multi-protocol
support (Windows CFS,
NFS, HTTP, FTP) that
eliminates the need
to have separate servers
for each supported protocol,
further enhancing their
ability to consolidate
storage from multiple
general-purpose servers.
JetStor
NAS 2000 is designed
to be easy to use and
install and includes
robust capabilities
designed to improve
storage reliability
and availability helping
to ensure your business
applications are available
when you need them.
Drive Capacity
JetStor SCSI 416S used
for data storage:
SCSI
Drive capacities of
36GB (10,000 / 15,000
rpm), 73GB (10,000 /
15,000 rpm), 146GB (10,000
/ 15,000 rpm) and 300GB
(10,000 rpm) are available.
JetStor
SATA 416S used for data
storage:
Serial
ATA drive capacities
of 36GB (10,000 rpm),
80GB (7,200 rpm), 120GB
(7,200 rpm), 160GB (7,200
rpm), 200GB (7,200 rpm),
250GB (7,200 rpm), 300GB
(7,200 rpm), 400GB (7,200
rpm), and 500GB (7,200
rpm) are available.
JetStor
NAS 1000 Storage Appliance

The
JetStor NAS 1000 Storage
Appliance provides an
affordable, scalable
storage option for your
network. This high-performance,
LAN-attached device
is designed to provide
shared storage to both
clients and servers
in Windows, UNIX, Apple
Macintosh, Novell or
mixed environments.
Engineered to meet stringent
demands for continuous
availability, JetStor
NAS 1000 features cableless
design, dual Gigabit
Ethernet ports and optional
dual SCSI or Fiber Channel
ports, all encompassed
in a small 1U enclosure.
The JetStor NAS 1000
connects to any JetStor
RAID array to insure
reliable uninterrupted
access to the data from
any network client.
Easy
to use Graphical User
Interface makes NAS
configuration a snap.
Experienced and beginning
system administrators
alike will find that
administering and maintaining
the JetStor NAS 1000
requires very little
time and effort. Additionally,
three year warranty
comes standard with
every NAS and covers
all components.
JetStor
NAS 1000 Storage Appliance
delivers multi-protocol
support (Windows CFS,
NFS, HTTP, FTP) that
eliminates the need
to have separate servers
for each supported protocol,
further enhancing their
ability to consolidate
storage from multiple
general-purpose servers.
JetStor
NAS 1000 is designed
to be easy to use and
install and includes
robust capabilities
designed to improve
storage reliability
and availability helping
to ensure your business
applications are available
when you need them.
Drive Capacity
JetStor SCSI 416S used
for data storage:
SCSI
Drive capacities of
18GB (10,000 / 15,000
rpm), 36GB (10,000 /
15,000 rpm), 73GB (10,000
/ 15,000 rpm), 146GB
(10,000 / 15,000 rpm)
and 300GB (10,000 rpm)
are available.
JetStor
SATA 416S used for data
storage:
Serial
ATA drive capacities
of 36GB (10,000 rpm),
80GB (7,200 rpm), 120GB
(7,200 rpm), 160GB (7,200
rpm), 200GB (7,200 rpm),
250GB (7,200 rpm), 300GB
(7,200 rpm), 400GB (7,200
rpm), and 500GB (7,200
rpm) are available.
JetStor
NAS 1000 WSS Storage
Appliance

The
JetStor NAS 1000 WSS
Storage Appliance is
designed to help keep
your organization's
data highly available
and protected, whether
that information is
local to users, stored
remotely at different
branch or departmental
sites, or consolidated
into a data center.
Small, midsized, and
enterprise-sized businesses
can all benefit from
JetStor NAS' effective
and dependable means
of sharing files and
storage.
JetStor
NAS 1000 WSS is quick
and easy to deploy,
making additional storage
capacity available to
your organization within
minutes of implementation.
It comes preconfigured
for simple Plug and
Play integration into
existing networks. An
intuitive Web-based
user interface with
simple step-by-step
installation instructions
helps to ensure that
storage is correctly
installed on an existing
network within minutes.
JetStor
NAS 1000 WSS Applicance
can be added to your
organization's information
technology (IT) infrastructure
wherever additional
storage is needed, without
having to reconfigure
the existing storage
infrastructure or bring
down the network. Through
its support for a broad
range of file serving
protocols, Windows Storage
Server 2003 makes possible
simple and effective
file sharing across
heterogeneous environments,
including Windows, UNIX,
Novell, and Macintosh
platforms. This means
that users on different
platforms can access
the same files without
additional interventions.
In addition, JetStor
NAS can work with your
current business investments.
These include server
management infrastructure,
such as the distributed
file system (DFS) and
Active Directory service;
utilities, such as antivirus
and backup software;
and security capabilities,
such as user authentication
and file and data encryption.
Engineered
to meet stringent demands
for continuous availability,
JetStor NAS 1000 WSS
features cableless design,
dual Gigabit Ethernet
ports and optional dual
SCSI or Fiber Channel
ports, all encompassed
in a small 1U enclosure.
The JetStor NAS 1000
WSS connects to any
JetStor RAID array to
insure reliable uninterrupted
access to the data from
any network client.
Easy
to use Graphical User
Interface makes NAS
configuration a snap.
Experienced and beginning
system administrators
alike will find that
administering and maintaining
the JetStor NAS 1000
WSS requires very little
time and effort. Additionally,
three year warranty
comes standard with
every NAS and covers
all components.
JetStor
NAS 1000 WSS is designed
to be easy to use and
install and includes
robust capabilities
designed to improve
storage reliability
and availability helping
to ensure your business
applications are available
when you need them.
Drive Capacity
JetStor SCSI 416S used
for data storage:
SCSI
Drive capacities of
18GB (10,000 / 15,000
rpm), 36GB (10,000 /
15,000 rpm), 73GB (10,000
/ 15,000 rpm), 146GB
(10,000 / 15,000 rpm)
and 300GB (10,000 rpm)
are available.
JetStor
SATA 416S used for data
storage:
Serial
ATA drive capacities
of 36GB (10,000 rpm),
80GB (7,200 rpm), 120GB
(7,200 rpm), 160GB (7,200
rpm), 200GB (7,200 rpm),
250GB (7,200 rpm), 300GB
(7,200 rpm), 400GB (7,200
rpm), and 500GB (7,200
rpm) are available.
Jetstor
SATA-USB Firewire E-Sata

You
have asked and we delivered
a truly portable RAID
solution - JetStor SATA
405U. Targeted for special
applications from e-mail
archiving and disk-to-disk
backup to forensic investigations
and home media servers,
this 5-bay array array
features powerful 400MHz
64-bit RISC processor
for blazingly fast I/O
operations, parity-assist
ASIC, completely cableless
backplane-based design,
and storage capacities
of up to 5TB in one
small portable desktop
enclosure. Three host
connectivity options
- USB, Firewire, and
eSATA, will meet the
requirements of just
about any power user.
Low
service and integration
costs are assured by
this JetStor's rugged
design for heavy-duty
field use, turbo cooling
fans, and embedded RAID
controller. One year
warranty comes standard
with every array and
covers all components.
The
JetStor SATA 405U RAID
addresses requirements
of many organizations
with modest data storage
prerequsites and delivers
unparalleled flexibility,
data availability, configuration
simplicity, and portability.
Drive Capacity
Serial ATA drive capacities
of 73GB (10,000 rpm),
150GB (10,000 rpm),
250GB (7,200 rpm), 300GB
(7,200 rpm), 400GB (7,200
rpm), 500GB (7,200 rpm),
750GB (7,200 rpm) and
1TB (7,200rpm) are available.
Full
48-bit ATA addressing
standard support.
Maximum
addressable capacity
2TB via the USB and
Firewire interfaces.
Maximum
raw capacity of 5TB
when using 1TB disk
drives, addressable
via the eSATA interface.
SCSI
ACCESSORIES

In
order to achieve maximum
error-free performance
on either an Ultra 160
or Ultra 320 SCSI bus
only the highest quality
cables must be used.
AC&NC's new line
of SCSI cables delivers
the reliable performance
our customers have come
to expect. Triple-shielding
eliminates RFI interference
while molded strain
relief jackets provide
extra protection against
cable kinks and breakage.
All SCSI cables can
be ordered in custom
lenghth and with custom
combination of SCSI
connectors. These are
simply the best cables
money can buy and all
of them come with a
lifetime warranty.
Available Connectors
SCSI-3 - 68-pin High
Density
SCSI-3 Right Angle (68-pin
High Density, Screw
or Latch Fasteners,
cable exit pin 1 end)
SCSI-3 Right Angle (68-pin
High Density, Screw
or Latch Fasteners,
cable exit pin 68 end)
VHDCI (68-pin Very High
Density, Screw Fasteners)
Technical Specifications
* Conductor: 28 AWG
7/36 Tin Copper
* Primary Insulation:
Foam Polyolefin
* Buffer: Foam Polypropylene
Tape
* Inner Shield: Aluminum
Polyester Tape, 25%
Overlap
* Outer Shield: Tin
Copper Braid, 85% Coverage
* Jacket: PVC
* Impedance: Differential
132 +/- 10 Ohms; Single
Ended 85 +/- 8 Ohms
* Capacitance: Mutual
12.5 pf/ft Maximum;
Single Ended 20 pf/ft
Maximum
* Time Delay: 1.50 ns/ft
Maximum
* Time Delay Skew: 0.040
ns/ft Maximum
* UL Listing: Type CL2
* CSA Certification:
AWM II A/B FT4
SCSI
TERMINATORS

High
quality SCSI terminator
is a must for reliable
data transfers. AC&NC
offers a full line of
LVD SCSI terminators
designed to operate
within the Ultra 320
SCSI specification.
Key Features
* Active Ultra 320 termination
increases reliability
and supports 320MB/sec
operation
* Provides regulated
SCSI voltage for perfect
termination
* Automatic adjustment
to SCSI bus speed changes
and modes of operation
- LVD / SE
* Matches cable impedance
to guarantee performance
SAN
ACCESSORIES
FIBRE
CHANNEL CABLES
In
order to achieve maximum
error-free performance
on either 2Gbit or 4Gbit
fiber channel bus only
the highest quality
cables must be used.
AC&NC's new line
of fiber channel cables
delivers the reliable
performance our customers
have come to expect.
All FC cables can be
ordered in custom lenghth.
These are simply the
best cables money can
buy and all of them
come with a lifetime
warranty.
Available Connectors
LC - to - LC optical
LC - to - SC optical
Technical Specifications
* For high performance
applications/high density
* 125µm Ceramic
Ferrule Technology
* Small size -- 1/2
size of standard SC
and FC products
* Singlemode and multimode
- 50/125 and 62.5/125
* Tuned singlemode assemblies
* High performance small
size cable: 900µm
buffered fiber assemblies
and 1.6mm cable assemblies
* Hybrid assemblies
available with all standard
connectors
* Hybrid SC's and FC's
terminated to 1.6mm
cable and 900µm
buffered fiber
* Factory terminated/factory
tested
Insertion
Loss:
Singlemode .2 dB maximum
-- .1 dB typical
Multimode .1 dB typical
Return
Loss:
Singlemode 55 dB --
PC endface
Multimode 20 dB
FIBRE
CHANNEL HOST BUS ADAPTERS


Designed
and deployed by major
server and storage OEMs,
the QLogic SANblade
QLE2462 and QLE2460
host bus adapters (HBAs)
offer the ultimate in
performance: 4Gbps Fibre
Channel in a x4 PCI
Express configuration.
Eliminating traditional
host bottlenecks that
impede the high performance
of 4Gbps Fibre Channel,
this union of the fastest
I/O and host technologies
creates the perfectly
balanced solution. These
HBAs are based on unique
single chip fibre channel
controller architecture
from QLogic. These multimode
optic HBAs are specifically
designed for servers
in direct attach storage
(DAS) as well as storage
area network (SAN) environments.
Key Features
High Performance
* 300,000 IOPS delivers
high I/O transfer rates
for storage applications
* Intelligent interleaved
DMA (iiDMA) ensures
maximum utilization
of data links
* Out-of-Order Frame
Reassembly (OoOFR) reduces
congestion and retransmissions
Superior Scalability
* Multi-ID and N_Port
virtualization ready.
Allows physical ports
to be part of multiple
logical networks
* Cisco VSAN ready.
Allows physical ports
to be part of multiple
logical networks
* Comprehensive Operating
System (OS) driver support
including Windows®,
Linux, Solaris,
NetWare®, and Mac
OS®
* Universal boot support
manages multiple hardware
platforms and boot options
Enhanced Reliability
*
* T10 Cyclic Redundancy
Check (CRC) ensures
end-to-end data integrity
across Storage Area
Networks (SANs)
* Three LEDs per port
display real-time status
and link activity information
SANBOX
5600 STACKABLE SWITCH

Now
the benefits of stackable
IP switches are available
for high-performance
4Gb Fibre Channel SANs.
SANbox 5600Q Series
stackable switches deliver
the performance and
seamless scalability
of a modular chassis
switch in an easy-to-manage,
pay-as-you-grow solution.
* Entry as low as eight
4Gb device ports
* Single-switch expansion
to sixteen 4Gb device
ports, plus four 10Gb
Inter Switch Lnk (ISL)
ports (20 ports total)
* Multi-switch expansion
to 96 device ports per
stack
* Single- (SB5600Q)
and dual-power supply
(SB5602Q) options
The
most cost-effective
way to build a SAN
SANbox
5600Q lets you start
small, then scale with
your company's needs
using state-of-the-art
10Gb Fibre Channel "stacking"
technology typically
found only in high-end
director products. As
proven in the Ethernet
world, stackable architectures
cut costs and increase
stability by providing
a dedicated, highly-expandable
transport for aggregate
ISL traffic eliminating
the disruption, port
waste and management
hassles associated with
using regular device
ports for inter-switch
links. It's like having
the performance and
"hands off"
convenience of an expensive
chassis switch without
the cost overhead of
a chassis!
Need more server or
storage ports? Simply
add another 5000 Series
switch to the stack.
Theres no need
to move existing cables
or disrupt devices your
ISL bandwidth expands
automatically with each
switch!